MENU
 
 
 

Chapuis Artisan 28 bore review

juxtaposes-progress-calibre-28

The 28-bore gun, made by Chapuis of St Etienne (which also makes similar guns in 20, 16, and 12-bore) falls into the excitingly eccentric category.
It looks like a traditional side-by-side, and a rather pretty one at that, but disassemble it and you find some real surprises. To begin with, this Chapuis is not a blatant imitation of a Holland, a Purdey or an Anson & Deeley as 95% of the world’s side-by-sides are, mechanically speaking. It is light, too, hitting the scales at only 5½lb even with 30in barrels. It is presented well and has attractive engraving on an elegant round-bar, sideplated action. The fitting of the plates to the action body is so good that you need a magnifying glass to see a join (similarly with the trigger plate beneath). This exemplary metal-to-metal fit is almost certainly the product of new machining technology.
The engraving combines full-coverage scroll and gamebirds. Pheasants are on the right lock plate, partridges on the left, and a woodcock on the rounded action belly, which also shows a bolder floral motif extending back towards the trigger guard.Scroll and floral work adorn the long Deeley fore-end latch and its carrier. The trigger guard has lighter coverage and a beaded edge to the right side. The trigger blades are nicely proportioned. It all looks good. Wood-to-metal fit is generally up to a similar high standard.
The oil finish and chequering are first class. Blacking is good, too, and the concave rib is well laid, tapered more than the average and has a small, neat, chess pawn-like nickel silver bead at the muzzles. The stock wood shows outstanding figure, and the form is satisfactory if a little different. The deep splinter fore-end is almost 11in long (practical on a small bore). The butt has a longer than average length of pull at 15.1⁄8in, with a substantial wooden butt plate (which would allow for easy shortening). The grip is of English straight pattern, but generously proportioned and notably deeper than the norm (and better for it). There appears to be a substantial fall in the hand of the stock, but it may be caused by the top strap being just a little too high.

Technical Data

The Chapuis has a most unusual side-by-side action which does not use the Purdey double lumps common to nearly all English side-by-sides and their many imitators.

An over-under-style stock bolt connects the butt to the action as seen in some recent Italian side-by-sides and the old Winchester 23. The ejection system is unconventional, too. The gun has a large, wide and hollow box attached to the barrel flats, which acts as a massive lump.

At its front there are split bearing surfaces for the hinge-pin (one sees something like it on the Fabarm side-by-side).

The barrels appear to be made on a dovetail or similar system: they are not monobloc or chopper lump.

The large, hollow lump, which locates in a correspondingly massive recess in the action table, is locked by a single flat bolt and contains small, exposed leaf springs for the ejectors. It is most unusual for a side-by-side to carry its ejector mechanism on the barrels in this way. Chapuis uses the same mechanism on its double rifles (and makes more of these than any other manufacturer). The firms guns have a reputation for reliability.

Like 16-bores, 28s have a particular fan base. This gun is lively as one might expect considering its weight but no wand, thanks to the long barrels, sensible stock length and hand-filling fore-end. It points well, and has a perfect hinge-pin balance. Breaks on simulated gamebirds with the fixed-choke (quarter, half) barrels are excellent using Lyalvale Express 24g loads. Recoil is surprisingly modest considering the lack of weight. However, it may be argued that the trigger pulls let the gun down a little, as there is some creep.

 

 
 

Leave a Comment